Question 1

What is the difference between epoxy and polyaspartic?

Accepted Answer

Epoxy is extremely hard but sensitive to UV rays (yellowing) and takes a long time to cure. Polyaspartic is flexible, 100% UV resistant, and allows for a return to service in 24 hours.

Question 2

How long does the installation take?

Accepted Answer

Typically 1 to 2 days for a residential garage with polyaspartic. Complex systems (polyurethane-cement) can take 3 to 5 days depending on the square footage.

Question 3

Why is acid etching not recommended?

Accepted Answer

Acid does not create an adequate anchor profile (CSP 3 required) and introduces water and hygroscopic salts into the concrete, causing the resin to peel after one winter.

Question 4

My concrete is cracked, can you repair it?

Accepted Answer

Yes, repairing cracks using structural epoxy fillers is an integral part of our mechanical preparation.

Question 5

Do you offer a warranty?

Accepted Answer

Yes, our installations are covered by a warranty against peeling, secured by our $20,000 bond with the RBQ.

Question 6

What are the advantages of cove bases?

Accepted Answer

Essential for MAPAQ standards, they eliminate right angles where bacteria harbor, allowing for perfectly hygienic washdowns.

Question 7

Is the coating slippery in winter?

Accepted Answer

We systematically add aggregates (aluminum oxide or full flakes) to create a certified safe non-slip texture.

Question 8

What is the lifespan of an epoxy floor?

Accepted Answer

If properly prepared (diamond grinded) and maintained, an industrial polymer floor can last 15 to 20 years.

Question 9

How do I maintain my new floor?

Accepted Answer

A simple cleaning with hot water and a neutral soap (pH 7). Avoid abrasive degreasers that dull the shine.

Question 10

Why is diamond preparation crucial?

Accepted Answer

It removes concrete laitance and opens the pores, allowing the epoxy base to penetrate and chemically fuse with the slab.

Question 11

What is the primary use of this space?

Accepted Answer

Determines the level of abrasion and impact resistance required.

Question 12

What is the age and current condition of your concrete slab?

Accepted Answer

Helps evaluate patching, leveling needs, and potential porosity.

Question 13

Have you noticed signs of moisture or efflorescence?

Accepted Answer

Indicates the absolute necessity of a moisture test (F2170) and potentially an epoxy vapor barrier.

Question 14

Will the floor be exposed to chemicals or thermal shock?

Accepted Answer

Guides the choice towards a 100% solid epoxy or a polyurethane-cement system (resists up to 120°C).

Question 15

What type of traffic is expected (pedestrian, forklifts)?

Accepted Answer

Influences the total thickness of the system (mils) and the compression load.

Question 16

What are your time constraints for completing the work?

Accepted Answer

Determines if a fast-curing resin (Polyaspartic) is required to minimize production downtime.

Question 17

Do you have specific regulatory requirements (MAPAQ, Health Canada)?

Accepted Answer

Mandates the integration of sanitary cove bases and strict non-porous finishes.

Question 18

What type of finish and non-slip texture do you prefer?

Accepted Answer

Ensures the perfect balance between aesthetics and CNESST safety compliance.

Question 19

Is the area exposed to direct sunlight?

Accepted Answer

If so, a 100% UV-resistant aliphatic topcoat is mandatory.

Question 20

What is the allocated budget for this structural upgrade?

Accepted Answer

Allows designing the best system engineering respecting your financial parameters.

Epoxy Flooring Montreal

Epoxy, Polyurea, and Polyaspartic Coatings

Renovations - Repairs - Appraisals

Certified, insured & reliable workers

Epoxy flooring in Montreal

Epoxy flooring/coating!

Construction hours made

Epoxy Express Inc

Epoxy, polyurea and polyaspartic flooring!

ℹ️ Frequently Asked Questions

💬 Expert Consultation

Epoxy Flooring MontrealEpoxy, Polyurea, and Polyaspartic Coatings